Endurance Hallin composite door in Anthracite Grey

Shown in Anthracite Grey

Endurance single door · Cornwall

Endurance Hallin composite door

The Hallin is built on Endurance's 48mm solid engineered-timber core, so it stays rigid in Cornish wind and driving rain rather than flexing like a foam-filled slab. Roughly 4% of the face is glazed across 4 apertures, and every unit is fitted with toughened, argon-filled double glazing as standard. Supplied and installed across Cornwall by our own CERTASS-registered fitters, finished in any of the 20 Endurance colours shown on this page.

The Hallin is one of the part-glazed designs in the Endurance single-door library, with 4% of the face glazed across 4 separate apertures. That proportion of glass is deliberate rather than decorative: a small run of apertures like this lets light reach a hallway without turning the door into a window. Every unit is toughened and argon-filled as standard, and the 4-aperture layout is what gives the Hallin its particular rhythm on the door face.

On site, the Hallin tends to get chosen for the same reason twice over: it suits understated styling, and the part-glazed layout gives homeowners exactly the balance of light and privacy they were describing before they'd seen a single sample.

Written by Cornwall Composite DoorsReviewed by Cornwall Composite Doors installers

Choose a colour

On-screen colours are rendered from our own studio photography of each door and will vary slightly with your screen. Ask us for a physical colour sample before ordering.

Want a quick price?

Free survey, no salesman, no obligation.

Get a free quote

Configure this door — colour, glass and hardware

Swap the colour, glass design, handle, knocker and letterplate and watch the Hallin update live using Endurance's own product artwork.

Updating…

Live Endurance artwork. Screen colours are indicative — ask us for a physical sample.

Your specification

  • Door design: Hallin
  • Colour: White
  • Glass design: Clarence
  • Handle: Lever/Lever

Send this design for a fixed price

Specification

Core
48mm engineered timber core, 17 laminated layers
Skin
Factory-finished GRP with woodgrain texture
Security
ABS 3-star anti-snap cylinder, multi-point locking, PAS24
Thermal
U-values from 1.2 W/m²K with the standard doorset
Guarantee
10-year Endurance manufacturer guarantee, colour included
Fitted from
£1,850 supplied and installed in Cornwall

Best suited to

  • Bungalows
  • Side entrances
  • Understated styling

This is a part glazed design. Anthracite Grey delivers architectural impact and reads sharp against brickwork, render, granite and slate across Cornwall.

Fitted by our own CERTASS-registered installers right across Cornwall — Truro, Falmouth, Newquay, Penzance, St Austell, Bodmin, Camborne, Redruth and every village between.

Matching the Hallin to your property type

With 4% of the face glazed across 4 apertures, the Hallin sits comfortably on side entrances — the glazing is proportioned to lift a hallway without turning the entrance into a shop window. On a cob elevation the panel lines read as intentional rather than decorative, which matters on the terraced streets around Redruth and Padstow where every door on the row is visible from the pavement. If your hallway is genuinely dark, this is one of the better-lit options in the part-glazed category without stepping up to a full-glass design. Whatever the property type, every Hallin we quote is measured and templated on site rather than to a standard size, so the panel and glazing proportions shown here translate exactly to the finished door.

Finishing the Hallin in the right shade

The Hallin's 4-aperture glazing pattern photographs well in Sage, where the frame lines around the glass stay crisp rather than disappearing into the panel colour. Rosewood is the other finish we would put in front of a customer choosing this design — it is muted enough that the glazing, not the door colour, is the first thing you notice on the part-glazed face. For a bolder frontage, Slate Grey gives the same proportions a completely different character without changing the layout at all. Whichever you choose, ask to see a physical sample against your own cob; screens flatten differences that are obvious in daylight. Woodgrain finishes such as Golden Oak and Irish Oak are available on the Hallin as well as the flat colours, and tend to suit this panel shape particularly well on older properties.

Glass designs and hardware for the Hallin

We would default the Hallin to an obscure design such as Prairie across all 4 apertures if the door opens straight onto a pavement, and offer Elegance as the upgrade where more visibility through the glass is welcome — a rear garden door, for instance, or a porch that already screens the view. On hardware, this panel layout carries a slim lever handle well; a bulkier traditional set can look slightly out of scale against apertures this size. Lead time on the Hallin is the same as the rest of the range — typically four to six weeks from survey to fit, whatever glass and hardware combination you choose.

Endurance Hallin FAQs

Similar part glazed designs

Get started

Ready for a beautiful new front door?

Free, no-obligation surveys across Cornwall. Written 10-year guarantee on every install.

Full county coverage

We cover the whole of Cornwall.

From Bude to Land's End, Padstow to the Lizard — our Cornwall-based surveyors and installers fit composite doors across every town, village and coastal parish in the county. Same standard, same 10-year guarantee, wherever you are.

  • Truro
  • Falmouth
  • Newquay
  • St Austell
  • Penzance
  • Bodmin
  • Bude
  • Launceston
  • Saltash
  • Redruth
  • Camborne
  • Helston
  • Liskeard
  • Wadebridge
Illustrated map of Cornwall showing towns we cover for composite door installation — Bude, Bodmin, Padstow, Tintagel, Newquay, St Austell, Truro, Falmouth, St Ives, Land's End and Lizard Point.