Endurance Cleeve composite door in Anthracite Grey

Shown in Anthracite Grey

Endurance single door · Cornwall

Endurance Cleeve composite door

The Cleeve is built on Endurance's 48mm solid engineered-timber core, so it stays rigid in Cornish wind and driving rain rather than flexing like a foam-filled slab. Roughly 3% of the face is glazed across 2 apertures, and every unit is fitted with toughened, argon-filled double glazing as standard. Supplied and installed across Cornwall by our own CERTASS-registered fitters, finished in any of the 20 Endurance colours shown on this page.

Cleeve sits in the part-glazed section of the Endurance range, with 3% of the face glazed across 2 separate apertures. That proportion of glass is deliberate rather than decorative: a small run of apertures like this lets light reach a hallway without turning the door into a window. Every unit is toughened and argon-filled as standard, and the 2-aperture layout is what gives the Cleeve its particular rhythm on the door face.

What sets the Cleeve apart on the doorstep is proportion rather than gimmick — the panel lines and glazing are sized so the door reads correctly from the pavement and not just up close. It has become a regular recommendation for side entrances.

Written by Cornwall Composite DoorsReviewed by Cornwall Composite Doors installers

Choose a colour

On-screen colours are rendered from our own studio photography of each door and will vary slightly with your screen. Ask us for a physical colour sample before ordering.

Want a quick price?

Free survey, no salesman, no obligation.

Get a free quote

Configure this door — colour, glass and hardware

Swap the colour, glass design, handle, knocker and letterplate and watch the Cleeve update live using Endurance's own product artwork.

Updating…

Live Endurance artwork. Screen colours are indicative — ask us for a physical sample.

Your specification

  • Door design: Cleeve
  • Colour: White
  • Glass design: Clarence
  • Handle: Lever/Lever

Send this design for a fixed price

Specification

Core
48mm engineered timber core, 17 laminated layers
Skin
Factory-finished GRP with woodgrain texture
Security
ABS 3-star anti-snap cylinder, multi-point locking, PAS24
Thermal
U-values from 1.2 W/m²K with the standard doorset
Guarantee
10-year Endurance manufacturer guarantee, colour included
Fitted from
£1,850 supplied and installed in Cornwall

Best suited to

  • Bungalows
  • Side entrances
  • Understated styling

This is a part glazed design. Anthracite Grey delivers architectural impact and reads sharp against brickwork, render, granite and slate across Cornwall.

Fitted by our own CERTASS-registered installers right across Cornwall — Truro, Falmouth, Newquay, Penzance, St Austell, Bodmin, Camborne, Redruth and every village between.

Matching the Cleeve to your property type

The 2-aperture layout on the Cleeve was clearly drawn for a specific kind of hallway: one that needs a defined amount of daylight rather than either none or all of it. That makes it a strong fit for understated styling, and we fit it regularly on streets in Penzance where the original Victorian doors would have carried a similar glazed proportion before they were replaced with plain uPVC decades ago. Against limewashed render it holds its own without needing a bold colour to do the work. Whatever the property type, every Cleeve we quote is measured and templated on site rather than to a standard size, so the panel and glazing proportions shown here translate exactly to the finished door.

Getting the colour right on the Cleeve

The Cleeve's 2-aperture glazing pattern photographs well in Black, where the frame lines around the glass stay crisp rather than disappearing into the panel colour. Slate Grey is the other finish we would put in front of a customer choosing this design — it is muted enough that the glazing, not the door colour, is the first thing you notice on the part-glazed face. For a bolder frontage, Green gives the same proportions a completely different character without changing the layout at all. Whichever you choose, ask to see a physical sample against your own limewashed render; screens flatten differences that are obvious in daylight. If you're unsure between two finishes, our configurator lets you preview the Cleeve in each of the 21 colours before you commit to a survey.

Finishing touches on the Cleeve

Cotswold is the glass design most customers choose for the Cleeve's apertures, since it obscures the view through without darkening the hallway the way a heavily patterned glass can. Harmony is worth considering if the door sits under a porch roof, where privacy is already handled by the structure and a clearer glass lets more light through. Pair either with a handle finish that matches your existing window furniture so the whole frontage reads as one decision rather than several. Lead time on the Cleeve is the same as the rest of the range — typically four to six weeks from survey to fit, whatever glass and hardware combination you choose.

Endurance Cleeve FAQs

Similar part glazed designs

Get started

Ready for a beautiful new front door?

Free, no-obligation surveys across Cornwall. Written 10-year guarantee on every install.

Full county coverage

We cover the whole of Cornwall.

From Bude to Land's End, Padstow to the Lizard — our Cornwall-based surveyors and installers fit composite doors across every town, village and coastal parish in the county. Same standard, same 10-year guarantee, wherever you are.

  • Truro
  • Falmouth
  • Newquay
  • St Austell
  • Penzance
  • Bodmin
  • Bude
  • Launceston
  • Saltash
  • Redruth
  • Camborne
  • Helston
  • Liskeard
  • Wadebridge
Illustrated map of Cornwall showing towns we cover for composite door installation — Bude, Bodmin, Padstow, Tintagel, Newquay, St Austell, Truro, Falmouth, St Ives, Land's End and Lizard Point.